Honeywell V8295A1016 Solenoid Normally Closed Gas Valve
V4295A/V8295A are normally closed and V4295S/V8295S are normally open (vent) solenoid gas valve. Suitable for use on furnaces, ovens, atmospheric burners, commercial water heaters, roof-top make-up air units, power burners, and commercial/industrial boilers.
Features
• V8295A,S are used with 24 Vac controllers.
• V4295A,S are used with 120 Vac controllers.
• Positive close off of gas flow when de-energized.
• High valve spring force allows up to 0.7 psi back pressure at valve seat.
• No inlet pressure influence at valve seat.
• Inlet pressure changes do not affect ability to close valve.
• Low operating noise.
• Low rush-in current.
• Upstream and downstream taps allows tapping and testing pressure points.
Product Specifications
Type of Gas Air, natural, manufactured, mixed, and LP
Pipe Size (inch) 1/2 in.
Pipe Size (mm) 13 mm
Pipe Size (DN) DN15
Capacity (cfh) 250 cfh
Capacity (m³/hr) 7.1 m3/hr
Valve Opening Time less than 1 sec
Valve Closing Time less than 1 sec
Pressure Ratings (psi) 2 psi
Pressure Ratings (kPa) 13.8 kPa
Body Pattern Straight-through, non-offset
Mounting Vertical to 90 degrees from vertical
Materials (Body) Die-cast aluminum
Current (max amps at rated Vac/Hz) 0.8 amps
Voltage 24 Vac
Frequency 50 Hz
Frequency 60 Hz
Electrical Connections Screw terminals
Operating Temperature Range (F) -40 F to +140 F
Operating Temperature Range (C) -40 C to +60 C
Inlet/Outlet Pressure Tapping 1/4 in. NPT
Dimensions (in.) 4 7/16 in. high x 2 7/8 in. wide x 2 3/16 deep
Dimensions (mm) 113 mm high x 73 mm wide x 56 mm deep
Approvals, Underwriters Laboratories Inc Component Recognized; File No. YLOZ
Approvals, Canadian Standards Association Certificate No. 158158-1154280, Guide No. C3371-03, 85
Approvals, Factory Mutual Approved: 3/8 in., 1/2 in., 3/4 in. only
Approvals, Swiss RE (formerly IRI) Acceptable
Approvals, Control Safety Devices Acceptable
Honeywell V8295A1016 Solenoid Normally Closed Gas Valve |
|
Cart is empty